Write your own review
  • Only registered users can write reviews
Existing reviews
2022 Nissan Frontier ProX
I put this kit on a couple of months ago, and I have to say it rides GREAT! Personally, I think it's better than stock, especially over large bumps.

My only complaint with the kit was not knowing they used bigger U-Bolts, so I had to make a trip to buy a drill bit to drill out the plates to 9/16's.

Other than that they ride very very well.
Clayton | 2/8/2022 5:58 PM
Was this review helpful? Yes No (2/0)
2013 Frontier SL 4x4
I installed this kit with a set of Bilstein 4600's.  I did not reinstall the overload leaf in the rear. I haul fairly often and I have had no problems with excessive sag. The ride quality is MUCH better.  

My only issue was the U-bolts.  They would not fit through the factory plate and needed to be drilled out to 9/16th.   I did not have that size bit on hand and had to re-use the factory bolts for a day.  I feel like that should have been in the product notes.

I would recommend new strut mounts and a hydraulic spring compressor to anyone doing this at home.
Zac | 11/10/2021 9:56 AM
Was this review helpful? Yes No (2/0)
Great kit!
Perfect kit if you've got a PRO4X with the Billstein 4600 shocks still in great shape. They're perfectly good performance shocks still and this kit complements them perfectly. Gets rid of the stock rake, nice aggressive lift with the piece of mind of not using spacers. Very pleased with my RC Killa kit.
Geoffrey | 8/10/2021 6:06 PM
Was this review helpful? Yes No (2/0)
2020 Nissan Frontier King Cab 4x4 Long Bed
Had the pleasure speaking with Chad via email. Gave awesome advices on what I wanted. Nothing too drastic, just wanted a lift to clear me for 33” tires. This kit is perfect. I didn’t need to replace my 4600 series Bilstein, but did it anyway and they pair up very well with the lift kit. The ride is awesome and surprisingly smooth. Thank you gents!! Cheers!!
Samnith | 8/3/2021 4:13 PM
Was this review helpful? Yes No (0/0)
Perfect kit for my 2020 Pro4X
I followed the advice of the guys at ADO and went with this spring kit since my stock Bilstein 4600s only have a few miles on them.  Also added the cam bolts for alignment. Ride quality of suspension is much better than stock and the height adjustment is perfect. Enough to improve ground clearance and make the truck look great. Not too much to create other problems that spacers or taller lifts can produce. Stayed with 16” factory wheels and 265/75 r16 BFG ATs. Again, perfect match for this kit. My guess is that bigger tires and wheels would fit with minor trim adjustment.
John | 3/8/2021 1:47 PM
Was this review helpful? Yes No (2/0)
This is it!
This is a FANTASTIC kit. My 2012 Pro4x still rides smooth and handles well. It gave me roughly 2" lift on the front and roughly 1.5" of lift in the rear.

I also paired this with Bilstein 5100's. Works fine with 4600's as well though, but the 5100's will allow for greater suspension travel to keep the wheels planted when off-roading.

Order those camber bolts with it!
Nick | 5/20/2020 10:25 AM
Was this review helpful? Yes No (0/1)
Great Kit!
I've had this kit for little while and all I can say is that its a great lift kit! The ride is much better (on and off road) than any spacer kit and it was a very easy install. If you do any off roading at all and are looking for a good kit at a great price, this is the one!
Troy | 8/26/2019 9:49 AM
Was this review helpful? Yes No (3/1)