Alldogs Offroad 2nd Gen Nissan Frontier Ubolt Flip Kit

Manufacturer: Alldogs Offroad Coop
SKU: ADO-D40-FLIP-KIT
$110.00

If you are looking to gain more clearance on the trail, this u-bolt flip kit is just what you need.  This kit includes 4 heavy duty 9/16" diameter u-bolts and 2 heavy duty 3/8" thick u-bolt plates.  The u-bolts accommodate a 3" diameter axle tube.  This kit is designed to work with 2-1/2" wide springs.  Our plates are manufactured in Lincoln, NE and are zinc plated for corrosion resistance.

Fitment:

  • 2005-20 Nissan Frontier

Notes:

  • Torque ubolts to 90ft/lb
Products specifications
Attribute nameAttribute value
FitmentNissan D40 2nd Gen Frontier (2005-2021)
Existing reviews
Beefy plates and bolt, but….
3
…if you need to run bump stops, these will not work. At least not as a bump stop bolt-on solution. If you’re good with a welder, you can probably weld on a plate on top of the axle plate.
Aaron | 4/29/2024 6:36 PM
Was this review helpful? Yes No (0/0)
Good quality but be careful about the instructions
5
Nice 9/16" u-bolts and thick spring plate. All really good quality. The manufacturers label on the u-bolts has torque specs. Do not pay attention to this! 9/16" u-bolts do have a torque spec of 130ft/lbs but Alldogs listing for this kit shows only 90ft/lbs. I didn't see this. I was doing my best to get the u-bolts to their listed torque of 130 and the spring plates were not happy. They started to bend and the u-bolts looked like they were going to start bending. Google confirmed the torque for this size u-bolt. So I came back to this product posting o see if ibhad missed something and thats when I saw that they want a lesser torque. I was somewhere over 90 but less than 130 but I think it'll be OK. I loosened them up and torqued to 90ft/lbs.
Benjamin | 2/10/2023 5:27 PM
Was this review helpful? Yes No (0/0)
Only registered users can write reviews