Dobinsons UCA59-002K Tubular Upper Control Arms, Toyota FJ Cruiser 4Runner & Lexus GX470 GX460

SKU: DOB-UCA59-002K
$580.00

Please note these are backordered until mid-March.

Dobinsons front upper control arm set. This will ONLY work on a vehicle lifted 1.5" or more, due to the built-in 3 degrees of caster. This will fit 4th Gen 4Runners 2003-2009, 5th Gen 4Runners 2010-2018, Lexus GX470 2003-2009 and Lexus GX460 2010 to 2018 and all generations of Toyota FJ Cruiser (FJC).

NOTE: The ball joints are not installed, and must be installed by a professional using a heavy duty press. A hand press will not be strong enough.

These will be noise-free as they use rubber bushings and a factory style ball joint. No greasing is necessary.

  • Complete kit for both left and right hand side, includes new ball joints (not assembled), OE style rubber frame bushings (installed), and washers
  • Has 3 degrees of caster built in, no adjustability or settings required
  • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2") wall thickness, and powder coated black
  • Works for any lift height of 1.5" or more. Any height less than that, a proper wheel alignment may not be able to be achieved
  • Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
Products specifications
Control Arm Position Front
Fitment Toyota 120 Series (2003-2009 4Runner, FJ Cruiser, Lexus GX470)
Fitment Toyota 150 Series (2010-2019 4Runner, FJ Cruiser, Lexus GX460)