Icon K22005 JK Jeep Wrangler Stage 5 3" Suspension Lift Kit

Manufacturer: Icon Vehicle Dynamics
SKU: ICO-K22005
$5,400.00

The ICON Vehicle Dynamics 3" Lift Suspension System is designed for Jeep JK owner's demanding the ultimate in performance and ride quality, without the larger stance you find in bigger lift systems on today's market. ICON's Jeep Wrangler JK 3" lift system is engineered with front and rear dual rate progressive wound springs which is the foundation for on and off road performance and suspension articulation. The dual rate design gives you a softer initial rate for superb on road comfort and a firmer than stock secondary rate that increases during compression for excellent bottom out control. ICON V.S. 2.5 Series Reservoir shocks are included front and rear to ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. The ICON CDC Valve upgrade is included in this stage for those desiring an easy way to tune the ride externally. Together the combination of ICON dual rate coils and V.S. 2.5 Series shocks adds 30% more wheel travel over stock, helping you rock crawl safer or soak up larger terrain at higher speeds keeping those wheels on the ground. In this Stage 4 system adjustable track bars are include front and rear for optimizing axle position to ensure your axles are perfectly centered under the vehicle. Upgraded tubular steel upper & lower link arms are designed to add performance, strength, and improved alignment range. This ICON 3" JK lift system is designed from the ground up to give the Jeep Wrangler JK's the best performance, suspension handling / ride quality, and clearance for 33" tall tires (35" tall with installation of aftermarket high-clearance fenders).

Key Features:

• Dual Rate Coil Springs Front and Rear

• Adds 30% More Wheel Travel over Stock

• Vehicle can be Returned Back to Stock

• No Welding or Cutting

• Includes High Performance Rebuildable / Revalvable Reservoir 2.5 Series Shocks w/ CDCV

• Out Articulates Most Long Arm Kits of Comparable Height

• Includes Adjustable Track Bars for Optimized Axle Positioning

• Pan Rod Bars include Dual Stage Bushing System and JM12T Rod End to minimize deflection while maximizing responsiveness

• Lifetime Guarantee that Coil Springs Won’t Sag

Tech Info:

• Fits Jeep Wrangler JK 2wd or 4wd models

• Lift heights based off of 4 door Rubicon JKU

• 2012+ models require exhaust extension kit (Part # 22011) for proper front driveline clearance

• No driveline modifications necessary if kit is installed as intended (with or without track bars)

• Front End Alignment Required

Wheel & Tire Fitment Info:

OEM Wheels & Tires: Yes

AfterMarket Wheels: 4.5" Backspace

(wheel spacers required to run factory wheels with an oversized tire)

Aftermarket Tires: 33" tall x 12.50"

(Larger 35" tire packages will fit with minor modifications or aftermarket high clearance fenders, test fitment recommended)

System Components Included:

22010 (QTY.1) | Jeep JK 3" Front Dual Rate Spring Kit (Pair)

22015 (QTY.1) | Jeep JK 2" Rear Dual Rate Spring Kit (Pair)

22040 (QTY.1) | Jeep JK 3" Lift Box Kit (front and rear billet bump stops / front sway bar links / hardware)

21020 (QTY.1) | Jeep JK Front Adjustable Pan Rod Bar Kit

21025 (QTY.1) | Jeep JK Rear Adjustable Pan Rod Bar Kit

21031 (QTY.1) | Jeep JK Front Lower Fixed Link Kit

21036 (QTY.1) | Jeep JK Front Upper Adjustable Link Kit

21041 (QTY.1) | Jeep JK Rear Lower Adjustable Link Kit

21046 (QTY.1) | Jeep JK Rear Upper Fixed Link Kit

27820C (QTY.2) | Jeep JK 2WD & 4WD 2”-3" Lift Remote Reservoir w/ CDCV Front Shock - 2.5 Series

27725C (QTY.2) | Jeep JK 2WD & 4WD 2”-3" Lift Piggyback Reservoir w/ CDCV Rear Shock - 2.5 Series

Products specifications
Attribute nameAttribute value
FitmentJeep JK Wrangler (2007-2018)
Only registered users can write reviews