Picture of Alldogs Offroad Rear Differential Breather with Relocator for Nissan Frontier, Xterra, & Titan

Alldogs Offroad Rear Differential Breather with Relocator for Nissan Frontier, Xterra, & Titan

6 review(s)
Manufacturer: Alldogs Offroad Coop
SKU: ADO-DIFF-BREATHER-RELOCATE
Free shipping
*
$45.00

The OEM rear differential breather which comes on the Nissan C200K & M226 axles (Frontier, Xterra & Titan) is a mechanical unit that is prone to failure when dust and dirt get into the unit.  When the unit fails, pressure can build inside the differential and will push out the axle seals and lead to a costly axle rebuild or replacement.  This replacement breather is a non-mechanical unit that is manufactured with a durable waterproof and air-permeable membrane (similar to that found in high-performance backpacking gear!).  It allows the differential to breathe with changes in temperature and atmospheric conditions. 

 

With the offroader in mind, we built this kit to include your choice of 3.5' or 7' of hose to relocate the breather somewhere away from the elements.  

 

Notes

  • Select 7' hose if you want to route your breather behind the taillight 
  • If you have a unique lift and require a longer hose, please reach out 
Products specifications
Attribute nameAttribute value
FitmentNissan 2nd Gen Xterra (2005-2015), Nissan D40 2nd Gen Frontier (2005-2021), Nissan A60 1st Gen Titan (2003-2015)
Customers who bought this item also bought
Picture of Alldogs Offroad RCKilla Coil Spring & AAL Lift Kit for 2nd & 3rd Gen Nissan Frontier

Alldogs Offroad RCKilla Coil Spring & AAL Lift Kit for 2nd & 3rd Gen Nissan Frontier

NOTE - Our Rckilla has been discontinued and our Spacer Eraser Kit replaces it.
$450.00
Picture of Alldogs Offroad Complete Lift Kit w/ Bilstein 5100's for 2nd Gen Nissan Frontier

Alldogs Offroad Complete Lift Kit w/ Bilstein 5100's for 2nd Gen Nissan Frontier

$1,100.00
Picture of Replacement Upper Control Arm Bolt for Nissan Truck/SUV

Replacement Upper Control Arm Bolt for Nissan Truck/SUV

$10.00
Picture of SPC 87520 Camber Bolt Kit for 2nd Gen Nissan Frontier & Xterra

SPC 87520 Camber Bolt Kit for 2nd Gen Nissan Frontier & Xterra

$75.00
Existing reviews
Fantastic Mod
5
Fits great and tucks right up behind the tail light.
Marcus | 12/13/2024 2:38 PM
Was this review helpful? Yes No (0/0)
Works great
5
Comes with everything you need, even a filter at the top of the hose to keep out dirt and debris. Comes with zip ties, and hose clamp, the hose, and an adapter. Just unscrew the old breather, screw in the adapter, put on the hose and hose clamp, feed it where you want it and you're good to go.
Tyrell | 3/21/2024 12:42 PM
Was this review helpful? Yes No (1/0)
A Must Have!
5
Ordered this kit via recommendation from rythecarguy on YouTube. Seeing that my '06 Xterra had the C200 rear end replaced at about 80k miles and now at 200k I figured I would protect it the best I could. Even as a daily driver I just never know when I'm going to hit that one puddle of water. Luckily my factory breather wasn't seized up but it was on its way to rust city. Don't screw around and try to hunt for the right barb just get the kit. The 7ft long thick fuel hose is way plenty so nothing is being stretched or kinked and the barn threads right in no problem. The little breather is pretty dang cool too. Comes with everything you need and nothing you don't . I used 2 tiny zip ties of my own to further secure my hose to the bumper behind the light to prevent any falling down. Awesome upgrade to save your diff/ wheal seals.
Christopher | 10/12/2021 11:27 PM
Was this review helpful? Yes No (1/0)
Easy instal!
5
Great way to prevent damage to your differential. It comes with everything you need. 3 zip ties too!
Jerson | 7/22/2021 12:03 AM
Was this review helpful? Yes No (0/0)
A must for extra security for your rear axle
5
The stock breather is a common failure point that could cause major damage to the axel.  This is a worry free CHEAP modification.  Easy to install.  All you need is a 12mm wrench and screwdriver.  7ft is great if you want to relocate behind the tail light, 3 ft is great to relocated to under a bed support.  Either way you can not go wrong.
Nicholas | 4/19/2021 2:12 PM
Was this review helpful? Yes No (0/0)
Imo make this your first Mod!
5
I literally just got home from wheeling and got stuck in about 3 feet of water. Not once was I worried about my diff taking in water because I have this kit installed. It installed in maybe 15 minuets and I ran it behind my rear passenger tail light. Quality product and fast shipping

2013 Xterra PRO-4X
Alec | 4/17/2021 11:32 PM
Was this review helpful? Yes No (1/0)
Only registered users can write reviews